Abro Fluorescent Green #1003 Spray Paint, 400 ml

If you are looking to refurbish your car, furniture, doors or office cabinets, ABRO Fluorescent Green Spray Paint is the right fit for you. Offering a smooth and bright touch to the surface, our instant-drying product caters to all of your painting needs. It is ideal for application over both - interior and exterior, of various surface types. 

An all-purpose, high-performing product of superior quality finish, this Abro Fluorescent Green Spray Paint checks off the list of a wide range of quality parameters. The high-concentration of genuine paint in our product lends a rich and vibrant finish to your home, workspace, car and so much more. It is also helpful in fighting-off moisture and squeaking from surfaces over which it is applied on. The lasting durability of our product offers you a long-term solution, and thus effectively doing away with all the hassle.

Key Features:

• High Quality, Fast Drying for Interior/Exterior Use.
• Long Durability and Performance.
• Genuine weight of paint.
• Less Gas more paint.
• High concentrate of paint for more coverage.
• No Sagging.
• Add vibrant color to car, home and hobby.
• Stops Sticking, Binding, and Squeaking.
• Repels Moisture; Conditions Rubber Seals.

Area of Application:

• All Surfaces must be free of any grease, dirt, rust, moisture, loose paint, or any other material which might interfere with proper adhesion.
• Glossy surfaces must be dulled by light sanding.
• Metals should be rust free and primer should be used for best results.
• Can be used on wood, metals, drywall, plaster, cardboard and masonry. For example: Furniture, toys, lamps, cabinets, bicycles, doors and many more.
• AIPL ABRO spray paint is a versatile all-purpose, fast drying spray paint useful for exterior and/or interior application to many surface types for a fast dry bright finish. For example-
  • Furniture Makeover
  • Wrought Iron Material
  • Letters Coloring
  • Artificial Jewellery Coloring
  • Wedding Pandal Decorative Touch
  • Automotive Touch

Direction For Use:

• All surface must be free of any grease, dirt, rust, moisture, loose paint, or any other material which might interfere with proper adhesion. Glossy surface must be dulled by light sanding. Metals should be rust free and primer should be used for best results. Cover adjacent area with Abro masking tape to protect from spray mist. Use at room temp.
• Shake can vigorously for one minute before spraying and occasionally while in use to ensure color uniformity and prevent clogging.
• On previously painted surface test spray in a small inconspicuous area.
• Hold can 12-16 inches from surface to be sprayed.
• Press spray button with steady even strokes while moving can rapidly back and forth. Finger must not protrude over front edge of spray button. 2 or 3 thin coats with intermittence of 10 min. are better than one continuous heavy coat.
• Should paint bubble or run, you are too close to the surface or spraying too heavy coat.
• After use, turn can upside down and depress valve button for several seconds to clear valve until only gas emerges so as to prevent clogging.
• Discard empty can in trash pickup. Do not place in home garbage compactor or burn.

Pack Content:

• 1 Abro Fluorescent Green spray paint (400 ml)