Standard Delivery in 5-7 days. (+) Rs 40 Cash on Delivery and service available for this location.
AKEPOX 5010 Gel-like, 2-component construction adhesive (2:1), only slight tendency to discolour, ideal for colouring, free of solvents, weather-resistant, Foodsafe (certified by an external German testing institute)
For bonding of face joints indoors and outdoors (facades, mitre joints) and quadratures, in conjunction with mortar for restoration work, ideal for white natural and artificial stones. Adding colouring pastes is recommended outdoors in order to hide the yellowing effect. For Techno Ceramics, quartz, concrete ashlar and hard stone.
Area of application - Kitchen, Bathroom & sanitary, Table & window sill, Flooring & stairs, Garden & terrace, Gravestone & monument, Facade, Wall, Food area, Stone industry
Material - Natural stone, Granite, Marble and limestone, Quartz, Ceramics, Solid-surface, Concrete ashlar, Terrazzo, Glass, Wood, PVC and acryl
Exterior / Interior Use
Bonding application - Bonding, Filling
Working time - Long
Adhesive technology - Epoxy resin
UV stability - Well
Bonding - Rigid
Hardening time - Slow
Polishing ability - Excellent
Consistency - Gel-like
Colour - Transparent, Can be coloured
Colour (A and B): transparent CC 2200
Density (A and B): approx. 1.16 g/cm³
Workable for: 20 - 30 min.
Hardening: 12 - 16 hrs.
Bending strength: DIN 53452 60 - 70 N/mm2
Tensile strength: DIN 53455 30 - 40 N/mm2
Modulus of elasticity: 2500 - 3000 N/mm2
Working time: mixture of 100 g component A + 50 g of component B:
At 10°C: 60 - 70 minutes
At 20°C: 20 - 30 minutes
At 30°C: 10 - 15 minutes
At 40°C: 5 - 10 minutes
Bending strength DIN EN ISO 178: 60 - 70 N/mm²
Tensile strength DIN EN ISO 527: 30 - 40 N/mm²
Properties: AKEPOX 5010 is a gel-like, solvent-free, two-component adhesive based on an epoxy resin containing a cycloaliphatic polyamine hardener. The product is characterized by the following properties:
Very neutral colour
Very low tendency to yellow
Easy dosing and mixing by use of cartridge system
High creeping strength due to gel-like consistency
Very low shrinkage during the hardening process and therefore low tensions in the bonding layer
Very good weather-resistant bindings
Good temperature stability: from -20°C up to 60 - 70°C for bondings exposed to weight, approx. 100 - 110°C for bondings not exposed to weight
Easy colouring with AKEPOX® Colouring Pastes or Colouring Concentrates
Good dimensional stability of the bonding layer
Low tendency to fatigue
Very good alkali-stability, thus the adhesive is very well suited to bond concrete
Excellently suited for bonding gas-impermeable materials as it is a solvent-free product
Good adhesion on slightly humid stones
Suited for bonding materials which are sensitive to solvents (e.g. expanded polystyrene, ABS)
AKEPOX 5010 is mainly used in the stone-working industry for the weather-resistant bonding and glueing of natural stone (marble, granite), Techno Ceramics as well as artificial stone or building materials (terrazzo, concrete). By means of the application of high- quality raw materials it was possible to develop a system which hardly yellows. It is thus possible to use it in combination with light-coloured or even white natural stone without the usual intensive yellowing of conventional epoxy-resin systems. Because of its supple, gel-like consistency the product has a high creeping strength on vertical surfaces. It is nevertheless possible to attain thin adhesive joints. Other materials can also be glued with AKEPOX 5010, e.g. plastics (hard PVC, polyester, polystyrene, ABS, polycarbonates), paper, wood, glass and many other materials.
AKEPOX 5010 is not suitable for the gluing of polyolefins (polyethylene, polypropylene), silicones, hydrocarbon fluorides (Teflon), soft PVC, soft polyurethane, butyl rubber and metal.
Instructions of Use:
Thoroughly clean and slightly roughen surfaces to be bonded.
Thoroughly mix 2 parts (volume or weight) of component A with 1 part (volume or weight) of component B until a homogeneous shade of colour is achieved.
AKEPOX Colouring Pastes or Colouring Concentrates can be added up to max. 5%.
The mixture remains workable for approx. 20 - 30 minutes (20°C). After approx. 6 - 8 hours (20°C) the bonded parts may be moved, After 12 - 16 hours (20°C) approx. they may be further processed. Maximal stability after 7 days (20°C).
Tools can be cleaned with AKEMI Nitro-Dilution.
The hardening process is accelerated by heat and delayed by cold.
Suitable for bonding of load-bearing construction parts, however, the relevant standards such as DIN 18516 part 1 and part 3 or DIN 2304 must be observed during application.
Only if the right mixing ratio is kept, optimal mechanical and chemical properties can be obtained. A surplus of adhesive or hardener has the effect of a softener and can cause discolouration in the marginal zone.
Single Mix cartridges are not suitable for compressed-air guns or guns with mechanical pistons.
Two separate spatulas should be used for the adhesive and the hardener.
An adhesive is no longer to be used if it has already thickened or is jellying.
The product is not to be used at temperatures below 10°C because it will not sufficiently harden.
At constant temperatures above 50°C the hardened adhesive tends to yellowing.
The hardened adhesive can no longer be removed by means of solvents. This can only be achieved mechanically or by applying higher temperatures (> 200°C).
The A-component slightly tends to crystallize (honey effect). The product can be made workable again by warming it up.
The stability of the bonding depends on the natural stone to be bonded: silicate-bound stone reacts better than carbonate-bound stone.
If stored in dry and cool condition (5-25°C/41-77°F) in its closed original container at least 24 months from production.
Health & Safety:
Read all instructions clearly before handling or using this product
Akepox 5010 Component A - 1500 gm
approx. 1.16 g/cm³
Akepox 5010 - Component A (1500 gm)
Get a Quote
Thank you for contacting us You will receive a call within 24 - 48 hours from our expert.