Asian Paints manufactures a wide range of paints for decorative and industrial use. In Decorative paints, Asian Paints is present in all the four segments v.i.z Interior Wall Finishes, Exterior Wall Finishes, Enamels and Wood Finishes. It also offers Water proofing, wall coverings and adhesives in its product portfolio.

Key Features:

• No pre-soaking of tiles & no water curing required post application
• Single component, ready-to-use mixture consisting of cement, sand & special additives.
• Meets the requirements of IS 15477 for tile adhesives
• Long pot life ensures larger quantities of material being mixed
• Excellent adhesion & slip resistance
• Water resistant due to low water absorption
• Less time and labour intensive, Trafficable (ready to use) after 24 hrs

Technical Specification:

• Coverage- 2 - 2.5 Sq.Ft./Kg for a bed of 3 mm thickness
• Kind of tiles can be installed- Ceramic/Vitrified/Porcelain
• Pot Life- 3 hour
• Curing Time- 24 hour

Recommended Usage: To be used for fixing ceramic tiles, vitrified tiles, marbles and stones on floor of interior & exterior areas & fixing small tiles of up to 1/2 ft size on walls up to 7 feet height

Application Process:

• Mix the adhesive in approx. 25% water by continuous stirring to get lump free consistency. Leave it for 5 minutes.
• Apply adhesive on floor/wall with the thickness of 3-6 mm using notch trowel within 8-10 Sq.Ft. area at a time.
• Fix tiles firmly into position with a sliding motion and hammer gently with soft mallet to assume a better bond.
• Leave adequate & desirable joints between the tiles by using spacers.
• Clean off excessive adhesive between the joints & on tiles with a damp cloth.
• Leave it to dry for 24 hrs. Fill the joints using Smart Care Epoxy Tile Grout/Cement based Tile Grout of desired shade.