Standard Delivery in 5-7 days. (+) Rs 40 Cash on Delivery and service available for this location.
Suitable for protection against overload & short circuit for Lighting & other Domestic Loads
06 A to 40 A
To avoid improper cable termination, the safety terminals guide the cable towards the cage terminal for systematic termination
Every device is provided with a dual position DIN rail clip, so it becomes much easier to change a device from a device bank connected to a bus-bar, without disturbing the existing wiring
Suitable for copper and aluminum cables, these terminals are compatible with cables upto 35 mm 2 cross section area
Grooves provided on outer body, so that when individual poles are placed adjacent to each other in a distribution board it forms a very effective channel for better air circulation, resulting into a cooler operation
A hammer directly connectd to the plunger strikes the moving contact arm with a force proportional to the peak current there by forcibly separating the moving contact from the fixed contact much before the latch mechanism operates.this further reduces the opening time of the circuit breaker.
Consumes less power, thus cost effective and energy saving.
The arc extinguishing device comprises of 13 plates arc chute.the arc under the influence of the magnetic field and arc guide is moved into th arc chute where it is rapidly split and quenched.
A circuit-breaker, the moving contacts of which return to and remain in the open position when the automatic opening operation is initiated after the initiation of the closing operation, even if the closing command is maintained.
Execution (pole) - Single Pole (SP)
Get a Quote
Thank you for contacting us You will receive a call within 24 - 48 hours from our expert.