If you are looking for durable white cement for smoothing walls, your search can end at JK Cement White Maxx Portland Cement. It bonds with tiles, marbles, and stones effectively and enhances the look of your room. Besides that, it is an excellent filler for holes and cracks in your residence or office. Along with sparkling whiteness, this cement has a 60 Mpa high compressive strength. In addition, the cement has a fineness of 370-400 Blaine. Thus, the product has a great economic value and is superior quality limestone that can be used as decorative cement paint. They are available in many sizes.
Higher gloss effect and smoother wall finish
Greater economic value.
Filler for all minor hair cracks
Superior quality limestone
Active bonding agents
Strengthens the application
+89% on the Hunter Whiteness Scale
High refractive index
High compressive strength of 60 MPa
The superior fineness of 370-400 Blaine
Decorative Cement Paint
White Cement Wash
Dry Mix Plasters and Mortars
Sand Faced Spray Plaster
.Exposed Grit washed Plaster
Pointing on Bricks / Stone Work
Precast Panels * Floors Insitu Terrazzo Flooring, Manufacturing of Mosalic Tiles, Casting of Pavement Blocks, For Fixing and Laying Marble Stones, Making Coloured Tile Adhesive and Grouts, Heavy Duty
Tiles* Ornamental and Decorative Application Architectural Concrete Components Made of Glass fiber Reinforced Concrete (GRC) & Synthetic fiber Reinforced Concrete (SRC), Ornamental Objects like Garden Furniture, Flower Pots, Grills, lamp Post, etc.
The surface to be painted should be free from oil, grease, dust, dirt particles efflorescence, and even loose chalky material.
It should be cleaned by scraping, scrubbing, or wire brushing. If the surface is too smooth then an undercoat of special cement primer should be applied.
After cleaning, the surface should be thoroughly soaked with clean water for 5 to 10 seconds and the action should be repeated 3 to 4 times depending on the absorption of the surface. The moisture must be properly absorbed. The surface should be considered ready for cement wash only when the sprayed water starts evaporating from it or running down.
Slowly add 2 parts of JK Cement White Max X to 1 part of clean, potable water, Stir continuously and mix thoroughly to obtain a creamy consistency.
Wait for 5 to 10 minutes, then dilute the mix further by adding an additional 1 part for ( or more) of water, until the mix is of brushable consistency.
If the surface is old or of time, add 10% to 15% of white glue adhesive (by weight) in water and apply it as an undercoat.
Apply one coat on the prepared and pre-wetted wall by brush or spray.
After 6 to 8 hours of drying, spray the surface with water.
After overnight drying, apply a second coat. Normally two to three coats are sufficient for a good finish.
3 bag of 1 kg white cement
(L)8.5 x (W) 6 x (H) 1 inch
1 Kg each
Get a Quote
Thank you for contacting us You will receive a call within 24 - 48 hours from our expert.