ConFlame – FRLS is synonymous with enhanced safety towards hazardous conditions arising out of fire since Smoke inhalation is the primary cause of death for victims of indoor fires. The inhalation or exposure to hot gaseous products of combustion can cause serious respiratory complications. Some 50–80% of fire deaths are the result of smoke inhalation injuries, including burns to the respiratory system.
KEI’s ConFlame – FRLS are manufactured from specially developed (In-house) PVC polymers, which restrict emission of smoke and toxic gases in the event of an unlikely fire. Thus providing enhance safety to close human habitation in house, residential and commercial complexes. ConFlame is capable of handling 105℃ operating temperature along with excellent Fire, Heat retardant, and non-toxic characteristics. It is manufactured using min 99.97% Electrolytic grade, annealed bare copper with more than 100% conductivity. Insulated with specially formulated PVC polymer, manufactured and formulated in-house. ConFlame ensures better reliability, energy efficiency, and the highest level of safety during a fire. KEI’s manufacturing proficiency enables ConFlame – FRLS to perform and serve uninterruptedly at adverse working and hazardous atmospheric conditions. Better reliability, energy efficiency, and the highest level of safety with a high Oxygen Index. Maximum energy saving ensures value for money
Excellent Electrical and mechanical properties.
High Flame retardant and fire-resistant properties. Lead (Pb) free non-toxic alternatives.
Higher Flexibility ensures easy handling and longer life.
Steam and boiling water resistant and anti-rodent.Excellent resistance to the tarnishing of Copper.
Conductor - 99.98% pure electrolyte grade Bright annealed bare Copper.
Insulation - FR+HR PVC compound with a high insulation resistance ensures an uninterrupted power supply at all weather conditions.
Operating Temp - 99.98% pure electrolyte grade Bright annealed bare Copper.
Conductor -15℃ to maximum + 85℃
Critical Oxygen Index - ASTM-D-2863, Minimum 29%
Temperature Index - ASTM-D-2863, Minimum 250 Degree Celsius
Acid Gas Generation - IEC 60754-1, Maximum 20%
Smoke Density Rating - ASTM-D 2843, Maximum 60 %
Number Of Wire: 32
Trunking: 11 Amps
Thickness Of Insulation: 0.6 mm
Current Rating (casting): 12.00 (Amps)
Current Rating (concealed): 11.00 (Amps)
DC Resistance (Max) at 20 Degree: 19.5 (Ohm/km)
For wiring solutions in multi-storied buildings, hotels, hospitals, commercial and residential buildings
Conductor Constant Diameter
1.00 sq mm
Fire Retardant Low Smoke and Halogen
Get a Quote
Thank you for contacting us You will receive a call within 24 - 48 hours from our expert.