Name: Swastik Flush Doors by Kitply Plywood
Brand: Kitply Plywood

Overview

Swastik flush doors are modern, elegant and ready to use that can be easily installed with minimum efforts to protect and beautify your dream home. They are made out of high quality wood to make them exceptionally durable and dimensionally stable with excellent tooling and finishing properties. Obviously, the doors are made with chemically treated seasoned hardwood battens and frames. The cross bands veneers are uniformly dried to the requisite moisture content. They are then bonded with special quality Phenol formaldehyde synthetic resin as per the guidelines of IS:2202. Swastik Flush Doors are treated for total termite and borer protection. The flush doors are manufactured under strict quality control conditions that exceed the lSI specifications. The doors can be manufactured according to customized sizes too.

Specialty of Swastik Doors:

Manufactured with selected and high quality hard wood timber.
Timbers used to manufacture Doors are treated with anti-termite borer chemical before sawing.
Frames and battens are seasoned in advance seasoning chamber for equalize the moisture content.
All the frames and battens are cut through ripsaw machine and planer for equal size and thickness.
The width of battens and frames are wider as per the specification of BIS.
Extra lock rail is provided for the convenience of handle and lock fittings.
Special care is taken during the assembly of battens to avoid any gap inside the door.
High solid content water proof PF Resin is used for high strength.
Doors are conditioned before cutting to avoid the warping and twisting.
Swastik doors are finished with highly precised wide belt sander.
All doors are strictly tested as per the BIS guidelines.

Sizes & thicknesses:

Standard sizes available. You can choose from the door thicknesses of 30, 32, 35 mm.

Test	151 Requirement	Observed Value
Dimension	Length, Width – + 5 mm Thickness – + 1 mm	Within limits
Squareness	Deviation not more than 1 mm on a length of SOOmm	Deviation below 1mm
General Flatness	Twist. cupping, warping not to exceed 6 mm
Local Planeness	Depth of deviation at any point to be less than 0.5 mm	Within limits
Impact Indentation Test	Depth of Indentation not to exceed 0.2 mm	Within limits
Edge Loading Test	Deflection of edge with max. To be less than 5 mm	Within limits
Shock Resistance Test Buckling Test	No visible defect after test Initial deflection – < SO mm residual deflection – < 5 mm	No visible defects Within limits
Slamming Test	No visible damage after Test	No visible damage
Misuse Test	No deformation after Test	No deformation
Varying Humidity Test	No visible warping, twisting or de-lamination	No such defects observed
End Immersion Test	No de-lemination at the end	No de-lemination
Knife Test	Minimum Pass Standard	Excellent
Glue Adhesion Test	No de-lamination	No de-lamination
Screw Withdraw Test	Load to withdraw screw to be more than 1000 N	Load – > 1000 N