Cico 22 Kg Corchem 206 l Roof Waterproofing Solutions

Product Description

Cico Corchem 206 l high-build Elastomeric Waterproofing Liquid Applied Membrane, based on Polyurethane is ideally suited for waterproofing of roofs, walls and foundation.

• Corchem 206 I and Hydroguard ACR are specially made for roofs as they can withstand extreme temperature fluctuations.
• it can be easily applied on vertical surfaces and has excellent adhesion to dry as well as primed surfaces of
  concrete, tile, plaster, masonry, mastic coating and metal.
• It is also great for terrace gardens as it doesn't allow water to penetrate the concrete.
• Excellent resistance to water, Alkalies, with inherent properties of antifungal growth.
• Excellent Compatibility with almost every construction material.
• Flexible enough to withstand a wide range of thermal expansion and contraction of structure.
• Fast and easy application eliminating construction delays and is labour saving.
• Crack-bridging capacity 3-5mm

Application Areas:

• As barrier coating for any part of the external or internal faces of the structures where a high degree of waterproofing is required,
  e.g. new roof, Water reservoir, Swimming Pool etc.
• Structure subject to adverse chemical or marine climatic attack or fungal growth zone, e.g. Chemical Plant, Oil Refineries etc.
• General concrete structures, masonry, brick, tile asbestos, galvanized tin, refurbishing old waterproofing system including torch-on membrane etc.

Method of Use:

• -Surface Preparation
• The area to be coated must be sound, clean and free from oil, grease or any other surface contaminants.
• Remove any loose materials or laitance by scraping, chipping, mechanical abrasion or any other suitable methods.

Coverage:

• 1-1.2 kg per m2 in two coats for a minimum thickness of 1 mm, for heavy-duty application, 1.5 mm thickness is recommended.

Precautions:

• Time interval between two coats should not be more than 48 hours.
• There should not be rain up to 24 hours after the application of coating.
• Moisture content of the surface should not be more than 7 Percent
• A protective layer (based on cement-sand and 6-10mm down coarse aggregate mix) shall be provided on the top layer.
• There should not be any naked flame nearby the application and storage area.

Technical Data:

• Shelf Life - One year if unopened and stored properly
• Base - Cold applied elastomeric Polyurethane Polymer
• Component - Single Component
• Colour - Black
• Chemical stability - Resists most common spills like oil and mild acids and alkalis.
• Elongation (ASTM C 836) - More than 400 percent
• Hardness, Shore A - 50-55
• Temperature resistance -100 degrees C to 800 degrees C
• Solids - Upto 80 percent