Dr. Fixit Roofseal 5 Kg

Dr. Fixit Roofseal is a single component cold applied elastomeric waterproofing coating based on synthetic resin emulsion. It is a tough yet extremely flexible coating that can be efficiently applied to any thickness by roller or squeegee creating a fully adhered waterproofing coating with no wastage. It is water based with low VOCs that is sustainable for years as a waterproofing coating.

Areas of Application

• Waterproofing of flat concrete roofs
• As an external protective coating for block works before fixing Aluminum Composite Panels

Features and Benefits:

• Waterproofing - High film build up provides excellent water resistance
• Elastomeric - Excellent flexibility and elongation properties - can easily accommodate all normal building movements.
• Seamless - Can be applied to complex shapes to form a seamless and highly durable water proofing membrane.
• Adhesion - Adheres firmly to most of building surfaces including concrete, brick etc. both horizontal and vertical surfaces.
• Water based - Easy cleaning of tools and brushes by water.
• Easy to apply - Suitable consistency for easy application by brush, roller or squeegee

Technical Specification

• Brush ability : No sag, slip and run off
• Solid content, % : 55-60
• Specific Gravity : 0.99 - 1.05
• Elongation at break % : > 1000
• Water Resistant : No blistering and re-emulsification
• Peel adhesion to concrete N / mm(square): 1.5
• Water vapour permeability : 0-5 gm/sqm. 24 hrs. (Full cured in 24 hrs.)
• Crack Bridging : No crack at 2 mm gap
• Water Penetration @ 3 bar : No penetration
• Tensile Strength, N/ mm(square): 1.1
• 0.75 ltrs/ m2 / coat

*Coverage may vary depending upon the texture and porosity of the surface

• Shelf life is 12 months from the date of manufacturing in unopened condition.
• Store in cool and dry place.
• Keep away from direct sun light.