Standard Delivery in 5-7 days. (+) Rs 40 Cash on Delivery and service available for this location.
Dr. Fixit Raincoat is composed of high quality acrylic emulsion polymer, light fast, weather durable pigments, properly selected, graded fine fillers, additives and biocides. It is used as a waterproofing and protective coating for exterior walls of the buildings because it forms higher film thickness, has excellent flexibility, breathing properties, water resistance, crack-bridging ability, weathering durability and an excellent resistance to the growth of microorganisms.
Areas of Application:
All types of exterior masonry surfaces, concrete, cement sand renderings, etc.
Applicable on asbestos sheets.
Features and Benefits:
Waterproofing - Higher film thickness provides crack bridging ability, waterproofing properties and resistance to cracking.
Flexibility - Flexible and covers hairline cracks(up to 0.5 mm) effectively, thus prevents ingress of water.
Toughness - Tough film withstands wind driven rain.
Elastomeric - High elasticity easily withstands stress caused by thermal expansion and contraction
Ready to use - No dilution is required
Microbial resistance - Resistance to fungus and algae hence maintains the aesthetic value.
UV resistant - Resistance to UV hence coating has longer life.
Low dirt pick up - Very low dirt pick up and can be cleaned easily hence maintains the aesthetics.
Breathability - Permeable to water vapour.
Ease of application - User friendly, easily applicable by brush, roller or spray.
Non toxic - It is Eco friendly
Nature: Single component
Appearance: Emulsion (available in white and; dark bases)
PH : 7.5 - 8.5
Specific gravity: 1.30 + 0.01
Solid content %: Min 52
Elongation %: ASTM D 412-02: Min 60%
Water permeability - Depth of water penetration: BS EN 12390: 6
Reduction in water penetration: 68%
Rapid chloride penetration test: Penetration of chloride ion: ASTM C 1202 - 97: Very low Algae and fungal resistance: No growth
Accelerated weathering (2000 hrs UV exposure): ASTM D 4587: No defects
Tensile strength, N/mm2: ASTM D 412-02: 1.5
Adhesion strength, N/mm2: ASTM D 4541: 1
Coating thickness (2 coats DFT), microns: 110
Coverage: 3.0 to 3.5 m2 per litre for 2 coats*
*Coverage may vary depending upon the texture and porosity of the surface
Shelf life is 24 months from the date of manufacturing in unopened conditions.
Store in a cool and dry place.
Keep away from direct sunlight and heat
3.0 to 3.5 m2 per litre for 2 coats
24 months from the date of manufacturing in unopened conditions.
Acrylic Emulsion Polymer
Get a Quote
Thank you for contacting us You will receive a call within 24 - 48 hours from our expert.