The fischer bolt anchor FWA is an economical solution for all applications where an approved fixation is not required.FWA is offered in zinc-plated steel and hot-dip galvanised steel with an imperial thread.The bolt anchor can be used with two anchorage depths.The standard anchorage depth guarantees a high load-bearing capacity.It means that fewer fixing points and smaller anchor plates are required. The reduced anchorage depth reduces the drill hole depth.It saves time during the installation and increases flexibility.
Key Features:
The FWA is suitable for pre-positioned and push-through installation.
Prior to installation, place the hex nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hex nut).
When the torque is applied, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
Advantages
The standard anchorage depth achieves high load-bearing capacities.
It means that fewer fixing points and smaller anchor plates are required.
The reduced anchorage depth reduces the drill hole depth.
This minimises the amount of time needed for installation whilst increasing flexibility.
Available with metric and imperial threads.
Building materials : Concrete C20/25, non-cracked.
In case of returning the product, customer needs to inform us within 7 days of receiving the order. In case, if you received a damaged product, it must be reported to us within 48 hours of delivery.
If the product is delivered defective or damaged, in that case customer needs to inform us through Email (support@mccoymart.com) or Call us at +91 8010407407 (Helpline Number) within 48 hours from the time of delivery.
Products should be unused.
All items must be returned in their original condition, with price tags intact, user manual, warranty cards, original accessories and in the original manufacturer's box/packaging as delivered to you.