Fischer Bolt Anchor FWA 12 x 100 Hex Bolts - Zinc Plated

Product Description

The cost-effective fixation without approval - for use in non-cracked concrete. The bolt anchor can be used with two anchorage depths. The standard anchorage depth guarantees a high load-bearing capacity. This means that fewer fixing points and smaller anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This saves time during the installation and increases flexibility.

Advantages

• The standard anchorage depth achieves high load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• Available with metric and imperial threads

Applications

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades

Building Materials

• Concrete C20/25, non-cracked

* You can find detailed information on building materials in the registration document.

Functionality

• The FWA is suitable for pre-positioned and push-through installation.
• Prior to installation, place the hex nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hex nut).
• When the torque is applied, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.

Technical Data