Neutral Black (250gm)

Neutral is cost effective, multipurpose, neutral cure silicone sealant.

Properties :

• Base : Polysiloxane
• Consistency : Paste
• Curing System : Moisture Cure
• Tack Free Time : (23⁰C)  Ca. 20 min.
• Curing Rate (230C ± 20C, 50 ± 5% R.H.) : Ca. 1 to 2 mm/24h
• Slump (23⁰C) : Ca. 3 mm
• Hardness (DIN 53505) : 40 ± 5 Shore A 
• Specific Gravity (DIN 53479B) : 1.40 ~ 1.44 g/ml
• Tensile Strength (DIN 53504) : 0.8 N/mm²
• Elongation at Break (DIN 53504) : > 250%
• Dielectric Strength (ASTM-D149) :  kV/m m
• Volume Resistivity (ASTM-D257) : ohm -cm
• Temperature Resistance : -40° C to +130°C

Applications :

McCoy Soudal Neutral silicones sealant will bond to make strong weatherproof seal on most common building material like glass, concrete, aluminium, brick, steel, ceramic, plastic and most porus & non-porus substrates.

Characteristics :

• One-component sealant/adhesive.
• Cures at room temperature.
• Excellent UV moisture resistance.
• Good adhesion to most common construction substrate like concrete, metals, plastics.
• Good waterproof and weatherproof for interior & exterior applications.

Not Suitable For :

• Structural glazing
• Continuous water immersion application
• Expansion joints
• Construction or sealing of aquariums 
• Cannot be painted
• Interior penetration fire stop sealing
• Continuous water immersion application

Joint Size : 

• Minimum Width : 5 mm 
• Maximum Width : 30 mm 
• Minimum Depth : 5 mm 
• Recommendation : 2 x depth = width 

Shelf Life :

12 month from date of manufacturing in unopened packaging stored in a cool and dry place at recommended temperatures recommended temperatures between +5°C and +35°. Protect against frost 

Packaging :

• 1 Neutral Black (250gm)