Soudaseal 265 is a Primerless elastic adhesive based on Silyl-Terminated Polymer specifically made for the windshield replacement aftermarket of inorganic and organic glass. Formulated with a high viscosity which confer to the product an excellent high initial tack. It combines very high holding power to excellent mechanical cohesion properties.
No bubble formation
Primer-less adhesion on almost every substrate
Vibration and sound damping properties
Environmental friendly – Free of isocyanates & solvents
Non-conductive and non-corrosive
No Hazard symbol required
Free from Isocyanates, Silicone, Solvents and PVC
Highest mechanical properties
Low electrical conductivity. Suitable for use with window aerials
Highest green strength (high initial tack) values
Excellent weathering resistance - extremely good colour stability and UV resistance Free from
Non-sag consistency - Exceptional thixotropy
Technical Data :
Base : MS Polymer®
Consistency : Thixotropic paste
Curing System : Moisture Curing
Curing Through Volume (after 1 day at 23°C and 50% r.h.) : 3,3 mm
Specific Gravity : 1,64 ± 0,02 g/ml
Hardness (DIN 53505) : 2 67 N/mm
Tack-free time (20°C and 65% r.h.) : 10 min.
Tensile strength (DIN 53504) : > 2,9 N/mm
Elastic Modulus at 100% (DIN 53504) : > 2,6 N/mm
Elongation (DIN 53504) : ≥ 180 %
Application temperature : from +5°C to +40°C
Temperature Resistance : -40°C to +100°C
Short term : 120°C
Volume Change (DIN 53504) : < 3%
Solvent Percentage : 0%
Isocyanate Percentage : 0%
Areas of Application :
Direct glazing and general structural elastic bonding adhesive. The high green strength and non-sag properties make it ideal for quick bonding of windscreen, side and rear windows on vehicle bodies. Equally suitable for structural elastic bonding, assembly of various materials exposed to high thermal and dynamic stress, in the transportation Industry (bus & coach, caravan, refrigerated vehicles, containers) and marine.
Surfaces must be clean, dry, free of water, oil, grease or rust and of sound quality. Remove all loose particles or residues with a jet of compressed air, sandpaper or hard brush.
Glass, metal and other non-porous surfaces must be free of any coatings and wiped clean with solvent. Cleaners and/or primers may be required to achieve optimal adhesion.
Shelf life :
12 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and +35°C.
1 pack of Soudaseal 265 Black (290ml)
1 pack of Soudaseal 265 Black (290ml).
Get a Quote
Thank you for contacting us You will receive a call within 24 - 48 hours from our expert.