Dr. Fixit Crack-X(Paste) Wall Waterproofing - 500 Gram, Crack-X(Paste)0.5

Crack-X Paste is composed of high quality weather durable acrylic emulsion polymer, properly selected graded fillers, light fast pigment & additives.

Key Features:

• Fibre reinforced - strong adhesion to surface
• Better hiding & better wall finish
• Good water resistance
• Flexible
• Non shrink - one time application
• Bonds strongly to cementitious substrates
• Better water resistance
• Consistency - Paste form, without sagging.
• Ease of application
• Water based with very low voc hence eco-friendly.
• Paint ability
• Staining - Non-staining. 
• Excellent adhesion with cementitious surface.
• Tinting ability
• Nontoxic & harmless to hands.

Areas Application:

• Crack-X Paste firmly into the crack with a spatula or putty knifes and level with the surface.
• Care must be taken to avoid formation of cavities or bubbles during application.
• Allow it set for 24 hours and then apply another coat of Dr. Fixit Crack-X Paste.
• Further POP or painter’s putty application can be taken up once it is fully dry.
• For best results allow Dr. Fixit Crack-X Paste to cure for 7 days.

Technical Specification:

• Sp. Gravity 30°C, gms/ml : 1.40 ± 0.02
• Consistency : Viscous paste
• Non volatile content : 75 -80%
• Tack free time, Minutes : 30 - 40
• Vertical slump. mm - Nil
• Service temp range, °C : -15 to + 80
• Extension recovery : Min 75%
• Freeze / thaw stability, cycles : Passes 5
• Volume shrinkage : 20%
• Movement accommodation factor : + 10%